Black CoPA 6-6.6 Nylon 1.75mm 750g PolyMide Polymaker

70.00 € 70.0 EUR 70.00 €

70.00 €

  • Brand
  • Color
  • Weight
  • Diameter
  • Material

This combination does not exist.

Brand: Polymaker
Color: Black
Weight: 750g
Diameter: 1.75mm
Material: PA

PolyMide CoPA


PolyMide is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing.

PolyMide CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.


Does PolyMide™ CoPA requires an enclosed printer?

No, all our Nylon features our Warp-Free™ Technology which means it does not require a heated bed or heated chamber of more than 50˚C.
PolyMide™ CoPA can be printed on a 30-40˚C bed without enclosure.


Do you need to anneal PolyMide™ CoPA?

PolyMide™ CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.
You can anneal PolyMide™ CoPA by placing your part in the oven at 80˚C for 6h.



Printing Settings

Printing Temperature: 250˚C - 270˚C
Bed Temperature: 25˚C - 50˚C
Printing Speed: 30mm/s - 50mm/s
Fan: OFF

Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 50mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s

Drying Settings: 80˚C for 6h
(Only if the material has absorbed moisture)



Mechanical Properties


Young's Modulus:

2223 ± 199 Mpa


Tensile Strength:

66.2  ± 0.9 Mpa


Bending Strength:

97.0 ±  1.4 Mpa 


Charpy Impact Strength:

9.6  ± 1.4 kJ/m2



Thermal Properties


Glass Transition Temperature:

67.0˚C 


Vicat Softening Temperature:

180.0˚C 


Melting Temperature: 

190.0˚C