E3D V6 Hotend 1.75mm 24V complete


70.00 € 70.0 EUR 70.00 €

70.00 €

Not Available For Sale

  • Brand

This combination does not exist.

Brand: E3D

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.


Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

1211136871454321910DescriptionBOM IDQtyCollet11HeatSink21HeatBreak31V6 HeaterBlock41M3x3 Grubscrew51DescriptionBOM IDQtyM3x8 Dome-head screw61V6 Nozzle71V6 Sock81ThermistorCartridge91HeaterCartridge103DescriptionBOM IDQtySelf Tapping Screws114E-FAN-30-30-10121Fan Duct131Collet Clip141

Key features:

All metal heatbreak

Maximum temperature: 300ºC

Cartridge style heater block 

Groove mount


Default Kit includes:

1 x V6 heatsink 1.75mm or 2.85mm

1 x V6 heatbreak 1.75mm or 2.85mm

1 x V6 brass 0.4mm nozzle 1.75mm or 2.85mm

1 x V6 duct

- 1 x V6 aluminium heater block 

- 1 x Heater cartridge 12V or 24V

- 1 x Thermistor cartridge

- 1 x Thermistor extension cable

- 1 x 30 x 30 x 10 fan 12V or 24V

- 1 x Thermal compound

- 1 x V6 fixings kit

- 1 x V6 silicone sock

- 1 x PTFE tubing 100mm or 800mm