PrimaCreator Value Water Washable UV Resin - 500 ml - Light Grey

https://www.fission3d.com/web/image/product.template/133/image_1920?unique=983c00b

35.00 € 35.0 EUR 35.00 €

35.00 €

Not Available For Sale

  • Brand
  • Color
  • Weight
  • Material

This combination does not exist.

Brand: Prima Creator
Color: Gray
Weight: 500ml
Material: Water Washable

DLP Resin for 3D Printers – Buy PrimaCreator Value Water Washable UV / DLP Resin

PrimaCreator Value water-washable UV / DLP resin allows you to create high-quality 3D prints. Create 3D prints with delicate structures, fine details and wonderful surfaces. Process this resin on your UV LED & DLP 3D printer in a wavelength range of 395-405 nanometres.

Material properties PrimaCreator Value Water washable UV / DLP resin:

  • Use on your UV LED & DLP 3D printers
  • Optimised for processing in the wavelength range 395-405 Nm
  • Fine details & perfect surfaces of the cured 3D prints
  • Minimised odour of the material
  • Washable in water, no IPA necessary
  • Fast curing time: 4 - 8 seconds per layer for faster 3D prints

If you want amazing results for less cost than many other brands – PrimaCreator VALUE Resin should be your first choice!

PrimaCreator's new water washable resin is the latest addition to the range and offers the same high quality as our other resins.

Simply clean the 3D printed resin with water

Unlike most other 3D printing resins, PrimaCreator's water washable resin does not require chemicals to remove uncured material from the finished 3D print. Simply rinse it in normal tap water and it comes out clean and ready to cure. This approach is the best choice for you and the environment.

Powerful colour 3D prints & attractive transparent parts

The finished and cleaned 3D print is a monochrome part with a beautiful, semi-matte surface with excellent detail and smooth layer transitions.

If you opt for the transparent resin, you get a transparent resin that looks stunning.

  • The most noticeable thing is that it does not smell very strong.

Resin for 3D printing on many DLP 3D printers

VALUE Resin is designed to work well on low power DLP 3D printers like the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that use UV light for curing.

High quality 3D printer resin & Perfect curing

3D printer resin from our VALUE line is a high-quality resin made from the best materials. This is also evident in the curing process. Your finished 3D prints will cure perfectly in sunlight or in a UV curing chamber. When curing is complete, the result is a rock-hard 3D print with very little material shrinkage.

Depending on the design of your 3D print, curing times may vary:

  • In a UV light curing chamber it takes about 2-5 minutes
  • In sunlight 10-20 minutes
  • In daylight on a cloudy day it can take up to 60 minutes


Flexural modulus:1.882-2.385Mpa: Elongation at break:4-10%
Flexural strength :40-58MPa Hardness(Shore D):85-88 D
Hot deformation temp.:80℃ Glass transition temp.:100℃
Thermal expansion:95*E-6 Density:1.05—1.25 g/cm3
Volume shrinkage:3.35%-4.24% Notched impact strength:41-48j/m
Linear shrinkage:1.05-1.35% Viscosity:100-350MPa·s
Tensile strength:30-52MPa  
Tensile modulus:1.779—2.385 MPa