Purple Satin PLA 1.75mm 750g Prima Creator


30.00 € 30.0 EUR 30.00 €

30.00 €

Not Available For Sale

  • Brand
  • Color
  • Weight
  • Diameter
  • Material

This combination does not exist.

Brand: Prima Creator
Color: Purple
Weight: 750g
Diameter: 1.75mm
Material: PLA

PrimaSELECT PLA Satin 3D Printer Filament from PrimaCreator

Buy this satin PLA filament and you will get an excellent and very high quality silky shiny 3D printing material. Finished 3D prints made from PLA Silk Filament have silky shimmering surfaces. The satin finish gives your 3D prints a very classy look.

Material properties PrimaSELECT PLA Satin:

  • Silk shimmering PLA filament for your 3D printer
  • Create impressive works of art from PLA Satin Filament
  • Satin filament is easy to process like normal PLA
  • Non-toxic material with no harmful fumes
  • Perfect for your artwork & design ideas

PLA 3D printer filament in silky shiny colours

PrimaSELECT PLA Satin is available in a wide range of silky colours. The filament is made of modified PLA material and is much stronger than ordinary PLA material. This is due to the added additives, which have been mixed with the best raw materials.

Free from unpleasant odours & toxic fumes

The filament is non-toxic and free from unpleasant odours during processing. 3D prints with Silk PLA impressive noble looking objects & artworks, which are covered with a silky touch.

Super 3D prints with top layer adhesion

Achieve super 3D printing results easily and reliably with extremely strong adhesion between the individual layers. Polylactic acid (PLA) is a biodegradable polymer.

Use PLA Satin filament on all your 3D printers

Process PrimaSELECT PLA Satin filament on all your 3D printers, including those with Bowden material feed/extruders. If you have a dual extruder 3D printer and want to 3D print with support material, we recommend using PrimaSELECT PVA. This support material bonds well with PLA Satin and is easy to remove. Simply place it in a water bath. The PVA will then dissolve.

Optimal adhesion & winding

PrimaSELECT PLA adheres to BuildTak or glass plates coated with adhesive spray or glue stick. Filament from Prima Filaments comes on a transparent spool. Just check how much filament is left on the spool and see if you need to change the roll.

Material data:

  • Density: 1.24 g/cm³
  • Extruder/Nozzle temperature: 185-220 °C (recommended: 210 °C)
  • Bed temperature: 0-60 °C
  • Recommended processing speed: 30-80 mm/s
  • Melting temperature: 210 °C ±10˚C
  • Material weight: 750 g
  • Coil dimensions: 200 x 80 mm
  • Coil inner diameter: 51.5 mm

Material PLA
Diameter 1.75mm
Tolerance ± 0.05 mm
Heated build platform required No
Print Temperature 180 - 210 °C
Melting Temperature 140-160 °C
Weight Filament 750 g
Spool Size 200 x 55 mm 
Spool Hub Diameter 53 mm