PolyLite PC
PolyLite is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.
PolyLite PC is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties.
Does PolyLite PC requires an enclosed 3D printer?
Yes and no, you can watch the reviews below for more information but the rule of thumb is the bigger your print (more than the size of your fist) the more the enclosure will be required for dimensional stability.
Does PolyLite PC absorbs moisture?
The short answer is yes, PolyLite PC will absorb moisture slightly faster than regular PLA. We recommend using a dry box to achieve high quality and strong prints.
Printing Settings
Printing Temperature: 250˚C - 270˚C
Bed Temperature: 90˚C - 105˚C
Printing Speed: 30mm/s - 50mm/s
Fan: OFF
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 75˚C for 12h
(Only if the material has absorbed moisture)
Annealing Settings: 90˚ for 2h